back to results
Need help?
Customer Service:
888-456-7796
M-F: 12PM - 1AM GMT
|Sat: 12PM - 12AM GMT
product info
Dunlop Enasave
The Dunlop Enasave is an OE (Original Equipment) tire for some Mitsubishi models.
UNIFORM TIRE QUALITY GRADE (UTQG)Uniform Tire Quality Grade
Treadwear340 - 540
TractionA
TemperatureA - B
| SECTION WIDTH Measures the width of the tire from sidewall to sidewall, which is mounted on a wheel and inflated. | 165 - 195 |
| ASPECT RATIO Determines the sidewall height of the tire, based on the width. | 65 |
| RIM DIAMETER Measures the rim size from top to bottom (in inches). | 14" - 15" |
| OVERALL DIAMETER Measures the tire height from top to bottom when mounted on a wheel and inflated. | 22.4" - 25.0" |
| RIM WIDTH RANGE The approved range of rim widths this tire can be safely mounted on. | 4.5" - 7.0" |
| WEIGHT The weight of the tire measured in pounds (weight of tire only). | 19.0 LBS |
| TREAD DEPTH Measured in /32 of an inch to determine the height of the tread block from top to bottom. | 8" - 9" |
| LOAD INDEX Determines the weight a tire can carry at maximum air pressure. See load Index chart. | 79 - 91 |
| LOAD RANGE Determines the ply rating of the tire. Should be replaced with the same or higher rating. | SL |
| MAX PSI The max psi is the highest pressure the tire can hold, but should be inflated to your vehicle specifications not exceeding this amount. | 44 PSI - 51 PSI |
| SPEED RATING Designation from laboratory testing to determine the maximum speed the tire can travel. Maintain the same speed rating or higher for replacement. | S - Up to 112 mph |
| SIDEWALL DESC. The sidewall designation to describe the lettering on the sidewall. | Black Side Wall |
| VPN Vendor Product Number | 267028902 - 267028904 |
Customer Reviews
There are currently no reviews for this product.
100%Recommended
1 of 1 people recommend these tires